KleenGuard 20545 Hellraiser WELDING Safety Glasses Shade 5.0 Lens ANSI Z87+

Description

KleenGuard 20545 Hellraiser WELDING Safety Glasses With Shade 5.0 Lens ANSI Z87+
The Hellraiser has a sleek design and is extremely lightweight. It fits a smaller profile, but can be used by all face sizes. The Hellraiser has a molded plastic nosepiece and protects from harmful UV rays.
Hellraiser Features:
Extremely lightweight
Plastic molded nosepiece
Sleek design
Smaller profile
99% UV protection
Shade 5.0 Lens:
Protects against IR radiation in torch solder, torch braze, and light cutting up to 1’’
The darker shade may also be ideal for some with light sensitive eyes.
Offers protection from excessive glare
Provides 99% protection from harmful UV-A and UV-B rays
100% polycarbonate lenses
Measurements:
Temple Length: 125 mm
Temple Width: 133 mm
Lens Height: 38 mm
Ideal for Small to Large faces
Compliance:
ANSI Z87.1-2010
CE-EN 166
AS/NZS 1337
*NOTE - Welding Safety Glasses and Goggles using Shade 5 filters or lighter are not intended for arc welding, which requires a darker lens found in Welding Helmets (OSHA's 29 CFR 1910.252 lists the minimum lens shade requirements for a variety of welding operations).
Welding protection with IR Green shades, Cobalt, or other very dark lenses is NOT to be worn while operating moving vehicles, bicycles or any such apparatus, particularly on the road, as these shades can significantly impair one's ability to see traffic signals adequately or accurately. "Welding protection" includes, but is not limited to: glasses, goggles, shields, masks, hoods and helmets. Safety Glasses USA, Inc. is not responsible for any damage or injury caused by such activity.